RESIN & FILLERS

TOOLS

Lamination toling manufacturing system.

SR 8100 / SD 3304

Product Description

MSDS
Datasheet

SR 8100 is a two component epoxy system. It has been specially formulated for resin transfer processes, such as injection or infusion.

This system has a very low viscosity at ambient temperature.

More Info

  • Infusion System
  • High mechanical properties can be achieved.
  • The cured system gives a temperature resistance up to 100°C (Tg 1)
  • A post cure is needed before demolding

SR 1710 / SD 7820

Product Description

MSDS
Datasheet

Very high performance structural epoxy system for Resin Transfer Moulding processes such as Infusion and Injection
Two component epoxy system
SR 1710 Inj. has very high mechanical properties, especially inter laminate shear strength

More Info

  • Excellent retention of mechanical properties in a wet environment
  • Temperature resistance: Tg1 max = 100°C
  • Has achieved GERMANISCHER LLOYD approval
  • Very low viscosity 
  • Low reactivity hardener for large part manufacturing

SR 1660 / SD 1305

Product Description

MSDS
Datasheet

Systems deleloped for high service temperature tooling from 120°C up to over 200°C continuously depending on the chosen hardener.

More Info

  • Two component epoxy systems for parts or tooling with a service temperature up to 120°C, 160°C peak
  • Excellent chemical resistance
  • Resistance to oxidization
  • Low exothermic peak.

SR GreenPoxy 28 / SD 3304

Product Description

MSDS
Datasheet

Result of the latest innovations in bio-chemistry, this epoxy resin system is developed for tools and parts resistant to temperatures.

More Info

  • SR Greenpoxy 28 is the result of the latest innovations in bio-based chemistry.
  • A high performance bio epoxy resin which has 28 % of its molecular structure deriving from plant origin.
  • Clear laminate.
  • High mechanical properties.
  • Lower environmental impact than standard Epoxy Bisphenol-A epoxy.

SR 1700 / SD 7820

Product Description

MSDS
Datasheet

The numerous hardeners associated with the SR 1700 resin offer a very wide choice of reactivity for the production of small and large parts.

The objective of this system is threefold: low toxicity / aggressiveness, performance and cost.
All components of the resin and hardeners were selected on the basis of toxicity / performance criteria: once applied, a low vapor pressure will be observed.

More Info

  • Slow hardener, very low viscosity allowing fast reinforcements wet out.
  • Laminates requiring 6 to 8 hours of working time.
  • Adapted to the production of parts with a service temperature up to 120°C.
  • Items can be handled and extracted from moulds after 12 hours at 40°C or 8 h at 60°C

SG 166 GM Black / SD 902

Product Description

MSDS
Datasheet

High temperature resistant epoxy black gelcoat.

More Info

  • Suitable for brush application.
  • Cure at room temperature, a post-cure is required before release.
  • Excellent thermal resistance after post-cure.
  • Good abrasion resistance.
  • Recommended for manufacturing of mould with a service temperature of 130°C max.

PRODUCTS

MARKETS

PROCESSES

Web Design: 100% Marketing | Website Terms & Conditions | Legal Notice

© Copyright 2014 Sicomin Epoxy Systems