RESIN & FILLERS
INFUSION, RTM
These very low viscosity products are designed specifically for resin transfer moulding techniques. Applications include Industrial, Marine, Energy, Transportation, Sports and Leisure.
| Weight ratio 100 g + .. g | Volume ratio 100 ml + .. ml | Pot life for 500 g at 20°C | Mix viscosity at 20°C (CPs) | FilmGel timeat 40 °C | TG 1 Max °C |
---|
|
SR 8100 / SD 882X |
SR 8100 / SD 8822 | 31 | 39 | 3 H 30 | 390 | 2 H 33 | 90 |
SR 8100 / SD 8824 | 22 | 27 | 1 H 27 | 300 | 1 H 07 | 81 |
|
SR 1710 / SD 882X |
SR 1710 Injection / SD 8822 | 35 | 43 | 6 H | 500 | / | 101 |
SR 1710 Injection / SD 8824 | 23 | 28 | 2 H 40 | 205 | / | 96 |
|
SR 1720 / SD 7840 |
SR 1720 / SD 7840 | 26 | 32 | 3 h | 1 100 | 5 h | 200 |
|
|
- A two component epoxy system formulated for resin transfer processes such as injection or infusion
- Particularly cost effective for Infusion production methods
- Very low viscosity at ambient temperature cure
- Compatibility with different hardeners allow the moulding of small to large parts with rapid remoulding time
More Info
- High mechanical properties can be achieved using SR 8100 and SD 8822-24 in combination
- The cured system gives a temperature resistance up to 80°C (Tg 1)
- Has achieved GERMANISCHER LLOYD approval

| Weight ratio 100 g + .. g | Volume ratio 100 ml + .. ml | Pot life for 500 g at 20°C | Mix viscosity at 20°C (CPs) | FilmGel timeat 40 °C | TG 1 Max °C |
---|
|
SR 8100 / SD 882X |
SR 8100 / SD 8822 | 31 | 39 | 3 H 30 | 390 | 2 H 33 | 90 |
SR 8100 / SD 8824 | 22 | 27 | 1 H 27 | 300 | 1 H 07 | 81 |
|
SR 1710 / SD 882X |
SR 1710 Injection / SD 8822 | 35 | 43 | 6 H | 500 | / | 101 |
SR 1710 Injection / SD 8824 | 23 | 28 | 2 H 40 | 205 | / | 96 |
|
SR 1720 / SD 7840 |
SR 1720 / SD 7840 | 26 | 32 | 3 h | 1 100 | 5 h | 200 |
|
|
- Very high performance structural epoxy system for Resin Transfer Moulding processes such as Infusion and Injection
- Two component epoxy system
- Very low viscosity and a low reactivity hardener for large part manufacturing
- SR 1710 Inj. has very high mechanical properties, especially inter laminate shear strength
More Info
- Excellent retention of mechanical properties in a wet environment
- Temperature resistance: Tg1 max = 100°C
- Has achieved GERMANISCHER LLOYD approval

| Weight ratio 100 g + .. g | Volume ratio 100 ml + .. ml | Pot life for 500 g at 20°C | Mix viscosity at 20°C (CPs) | FilmGel timeat 40 °C | TG 1 Max °C |
---|
|
SR 8100 / SD 882X |
SR 8100 / SD 8822 | 31 | 39 | 3 H 30 | 390 | 2 H 33 | 90 |
SR 8100 / SD 8824 | 22 | 27 | 1 H 27 | 300 | 1 H 07 | 81 |
|
SR 1710 / SD 882X |
SR 1710 Injection / SD 8822 | 35 | 43 | 6 H | 500 | / | 101 |
SR 1710 Injection / SD 8824 | 23 | 28 | 2 H 40 | 205 | / | 96 |
|
SR 1720 / SD 7840 |
SR 1720 / SD 7840 | 26 | 32 | 3 h | 1 100 | 5 h | 200 |
|
|
- Infusion epoxy system with low viscosity and very high temperature resistance of 200°C
- SR 1720 and SD 7840 form a two component epoxy system that can be processed at an average temperature of 30-35 °C
- Allows composite parts to endure extreme heat and perform at temperatures up to 200°C
Green Epoxy systems for Injection and Infusion.
More Info
-
Very low viscosity at ambient temperature.
-
Different hardeners allow the production of small to very large parts.
-
The cured system gives a temperature resistance up to 100°C (Tg onset).
-
The hardeners SD 4770 and 4771 are designed for very thick laminates by infusions.
-
Produce with about 38 % of carbon from plant origin and has a lower environmental impact than standard Epoxy systems.The bio-based Carbon content of our resin is certified by an independent laboratory using Carbon 14 measurements(ASTM D6866 or XP CEN/TS 16640). This percentage is function of the carbon origin contained in the epoxy molecule.
-
SR InfuGreen 810 is DNV-GL Maritime approved with hardeners SD 8822 and 8824.
