RESIN & FILLERS

PRE PREG PRODUCTION

Sicomin formulates a range of solvent free epoxy systems for prepreg applications that can greatly simplify production processes. Thanks to the products low resin viscosity, the fabric and resin can be impregnated at customers production facilities at an ambient temperature. The shelf life of the prepregs produced range from one week to a month and if refrigerated, even longer. Suitable applications include Aerospace, Marine, Transport, Sports, Leisure and Industrial processes.

SR 121 / KTA 31x

Product Description

Comparitive Chart

	Weight ratio 100 g + .. g	Storage time 25 ° C (days)	Min cooking temperature	Tg 1 Max °C	Gel time @ 80°C (mn)	Gel time @ 100°C (mn)	Gel time @ 120°C (mn)

MSDS

Datasheet

Epoxy system for in house prepregging.

More Info

Low viscosity systems suitable for manual or mecanical impregnation of fabrics, filaments, braids, stitched reinforcements.
Suitable for filament winding.
90 °C maximum working temperature
Post curing can be between 80 °C up to 150 °C
Two component systems without solvent, without reactive diluent, with no toxic nor CMR components
Store the prepregged fabrics away from humidity

Isobond SR 1252 / KTA 31x

Product Description

MSDS

Syntactic foam for densification of alveolar structures.

More Info

Densification of honeycombs, foams and insert areas
Fillet-joint for assembly of two parts of a structure / joint between hull and bulkhead
Bonding onto epoxy or old polyester laminates.
Sanding down to the fiber is highly recommended.
For stronger mechanical properties, thank you to refer us (Isobond SR 1170 / KTA 313 available, with a higher density)